Search results for "Glass transition"
showing 10 items of 372 documents
Spark Plasma Sintering of Metallic Glasses
2019
Spark plasma sintering (SPS) of metallic glasses (MG) can be quite different from sintering crystalline metallic alloys. Indeed, MG behave differently with increasing temperature, as they encounter a glass transition and devitrification. Their shaping can thus be compared to what can be performed on thermoplastic polymers. SPS is a promising way to prepare bulk parts from amorphous powders, since it allows very fast heating and cooling rates. It gives an advantage to avoid or limit devitrification of the amorphous phase upon the thermal cycle. However, diffusion mechanisms, which generally control densification, are activated at temperatures that are not compatible with MG structural integr…
Synthesis and characterization of chalcogenide glasses from the system Ga-Ge-Sb-S and preparation of a single-mode fiber at 1.55 μm
2008
International audience; The aim of this work is to study different compositions in the Ga-Ge-Sb-S system for the definition of two compositions compatible with the elaboration of a single-mode fiber at the 1.55 μm telecom wavelength. The variations of the glass transition temperature (Tg), the dilatation coefficient (α) and the refractive index (n) have been studied for two glasses series: GaxGe25−xSb10S65 (series 1), Ga5Ge25−xSb10S60+x (series 2). This study has lead to the choice of the Ga4Ge21Sb10S65 composition as clad glass for the preparation of the single-mode fiber and Ga5Ge20Sb10S65 composition as the core. The discrepancies for the studied parameters between the core and clad comp…
Water absorption and hydrothermal ageing of epoxy adhesives reinforced with amino-functionalized graphene oxide nanoparticles
2021
Abstract The study is focused on quantitative characterization of water absorption and hydrothermal ageing effects in a room-temperature amine cured epoxy adhesive widely used in automotive, aerospace, construction, and marine industries. Amino-functionalized graphene oxide (mGO) nanoparticles were incorporated into the epoxy (up to 1.72 wt.%) enabled cross-linking reactions and providing high interfacial adhesion, superior reinforcement efficiency and enhanced resistance to hydrothermal ageing of nanocomposites. Anomalous water absorption accompanied by progressive weight loss of samples (down to 7%) is fitted by two-stage models considering additive and coupled contribution from water dif…
Renewable polyol obtained by microwave-assisted alcoholysis of epoxidized soybean oil: Preparation, thermal properties and relaxation process
2019
[EN] The soybean oil polyol (SOP) use as feedstock in the polyurethane industry has been recently emphasized due to its excellent resistance to hydrolysis, which is also applicable in coatings and thermal insulation. In this article, the SOP was obtained by a very fast microwave-assisted alcoholysis of epoxidized soybean oil (ESO). The preparation method, thermal properties, and relaxation process were evaluated. High yields as opening and consumption epoxy group and selectivity of 99.8 mol%, 985 mol%, and 71.2 mol% were obtained. Through titrations, nuclear magnetic resonance and gel permeation chromatography were identified parameters as 0.32 mg KOH.g(-1) acid number, 190 mg KOH.g(-1) hyd…
Beyond Biodegradability of Poly(lactic acid): Physical and Chemical Stability in Humid Environments
2017
International audience; Poly(lactic acid) (PLA) is the most traded biodegradable and biobased material. It is largely used as ecofriendly substitute of conventional plastics. Nevertheless, one of the main limiting factors is its water sensitivity. PLA reacts with water and is hydrolyzed during time, which determines its performance. Limited information related to the hydrolysis mechanism driven by water in vapor state is available in scientific literature. Literature is mainly focused on the effects of water in liquid state. This lack of information is of significant importance, since PLA interacts with water in both phases. This work was aimed to give a full depiction of the chemical and p…
Glass-forming derivatives of 2-cyano-2-(4H-pyran-4-ylidene) acetate for light-amplification systems
2019
Abstract A series of 2-cyano-2-(4H-pyran-4-ylidene) acetate derivatives with triphenyl and 9H-carbazole moieties were synthesized and investigated, mostly for potential applications in organic solid state lasers. Synthesized compounds show remarkable amorphous film formation ability, tunable thermal properties (thermal stability varies from 190 °C to 387 °C and glass transition temperature from 94 °C up to 141 °C) with light absorption from 400 nm to 600 nm and photoluminescence from 600 nm up to 800 nm. Dyes with incorporated mono-styryl- electron donating fragment (KTB, KTBC and KTB3K) showed higher photoluminescence quantum yield (PLQY) (from 16% up to 23%), significantly lower amplified…
Continuous fractionation of poly[(dimethylimino)decamethylene bromide] and molecular weight dependence of the glass transition
1995
30 g of the ionene poly[(dimethylimino)decamethylene bromide] were fractionated by a continuous counter-current extraction method (CPF) using ethylene glycol monoethyl ether as the solvent and diisopropyl ether as the non-solvent component. The efficiency of the separation was checked by viscometry and gel-permeation chromatography (GPC) measurements. Eight fractions of different molar mass were prepared for differential scanning calorimetry (DSC) experiments. With bromide as counter-ion, the glass transition temperature of the ionene increases from ca. 60 to 85°C as the intrinsic viscosity of this material (in 0,4 M aqueous solutions of KBr at 25°C) rises from ca. 14 to 22 mL/g. When bromi…
Cure kinetics of a cobalt catalysed dicyanate ester monomer in air and argon atmospheres from DSC data
2004
A kinetic analysis of the cyclotrimerisation reaction of a dicyanate ester monomer catalysed by cobalt(II) acetylacetonate and nonylphenol in air and argon atmospheres has been carried out by differential scanning calorimetry (DSC). Dynamic and isothermal DSC scans as well as the glass transition temperature are the experimental data obtained. From isothermal scans a higher cyanate conversion in air than in argon was obtained. The cyanate conversions are satisfactorily described with a second-order kinetic equation in the kinetically controlled region, and by m-order (m<1) equation after vitrification is reached. Activation energies determined by different procedures agree among them, showi…
Determination of the glass transition temperature of poly(cyclohexyl acrylate) from oxygen permeability measurements
1993
Abstract The glass transition temperature ( T g ) of poly(cyclohexyl acrylate) (PCA) has been obtained from measurements of the oxygen permeability ( P = 0.60 barrers, T g = 23.5 ± 2.0°C) using a potentiostatic electrochemical sensor, and from the oxygen diffusion coefficient ( D = 0.12 × 10 −8 cm 2 s −1 , T g = 24.0 ± 1.8°C) by the time-lag method. A T g of 25 ± 1°C was found by differential scanning calorimetry and a T g of 25.0 ± 3.5°C was obtained from the specific volume by dilatometry. The fractional free volume ( v f ) at T g is 0.020 ± 0.002, which is slightly below (∼ 20%) most glassy polymers. A linear correlation has been observed between ln D and the reciprocal of v f , which su…
Solidification behavior of the theta system 2-propanol/poly(n-butyl methacrylate) I. Influences of thermoreversible gelation on stationary flow
1994
Zero shear viscosities, η0, were determined by means of a magnetoviscometer for melts of poly(n-butyl methacrylate) (M = 8.7 to 450 kg/mol, T =53.5 to 200°C) and for concentrated solutions of the highest molecular weight sample in isopropanol (T = 34.8 to 131.5 °C). Master curves can be constructed in both cases if the reference temperature is set proportional to the gelation temperature of the particular fluid. Special intersegmental interactions (eventually leading to thermoreversible gelation) can above all be felt in η0 (T) and in M c , the critical molecular weight determined in plots of log η0 vs. log M. As the temperature is lowered, the behavior changes from WLF to Arrhenius, and M …